Lister Diesel Engine - 6 HP
Vertical Diesel Engine is rated on the effective horse power at engine crankshaft on a maximum load for continuous running. Each engine is tested as per IS : 111170 to give continuous rating. InquiryCooling : Engine Cooling is efficiently handled by run-through water supply. A radiator or a cooling tank could also be provided if required.
Rotation : Standard rotation is clockwise, facing flywheel keeping exhaust on the left hand side.
Fuel Injection Equipment : MICO (Bosch) or USHA Fuel Injection Equipment or equivalent.
Cylinder Liner : The Cylinder liner is Hard Chrome Plated.
Air cleaner : Oil bath type Air Cleaner is Provided to clean incoming air. Use of clean air increases the life of Cylinder liner.
Standard Equipments : Pulley, Spanner, set, Screw Driver, Oiler, Starting Handle, Air Cleaner, Silencer, Fuel Tank, Tool Bag Instrunction Manual and Hose Nipple.
| Description | Single Cylinder, Vertical, Four Stroke, Water Cooled, Fitted With Tapper Roller Bearing. |
|---|---|
| Rated Power | 4.4 K.W. / 6HP |
| Rated Speed | 650 RPM |
| Type | TRB |
| Bore | 114.3 MM |
| Stroke | 139.7 MM |
| Cubic Capacity | 1.433 Ltrs. (1433 CC) |
| Bumping Clearance | 1.5 - 2 MM |
| Fuel Specification | High Speed Diesel |
| Fuel Injection Pressure | 150 - 160 KG/CM2 |
| Specific Fuel Consumption | 268 G/KWH |
| Lubrication Oil Consumption | 5 G/KWH On Full Load |
| Sump Capacity of Oil | 4.5 Liters |
| Lubrication Oil Specification | SAE 30/40 |
| Mechanical Efficiency | 80% Assumed |
| Air Valve Tappet Clearance | 0.25 - 0.40 MM |
| Exhaust Valve Tappet Clearance | 0.65 - 0.85 MM |
| Compression Ratio | 18:1 |
| Foundation Hole Center Distance | 13 X 13 Inch (330 X 330 MM) |